Chassis (Complete)	Consists of a chassis fitted with all wishbone and rear arm mounts, engine mounts, rack mounts, pedal box mounts, all seat and belt mounts and any other brackets required. Please note that powder coating is extra. See lower down the page for further details. (Collection only and please specify Class 8, 9 or 10 with order)	£900.00
Steering Rack	Centre fed quick rack. Fully rebuildable	£150.00
Track arms	Pair of steering arms made to take 1/2" steering joints	£35.00 / pair
Front Wishbone Set	All four wishbones fitted with all inserts for rose joints and shock mounts	£100.00 / set
Rear Arms	Tubular set of rear arms fitted with mounting plates to take sierra hubs and all shocker and anti roll bar mounts	£100.00 / pair
Rose Joint Set	Consists of a basic set of rose joints to get the car rolling. Includes all front and rear arm joints and steering joints	£210.00 / set
Adjustable Pedal Box	Adjustable pedal box that fits all our cars and enables the driver to move the pedals up to 10” whilst seated in the car. Comes complete with all cylinder mounts and pedals	£70.00
Gear Lever	Aluminum lever (Includes bearing to take 10mm bolt)	£35.00
Master Cylinders	Standard ¾ cylinders for use on brake or clutch (bike applications will require a pedal stop)	£25.00 each
Panel Kit	Full panel kit to fit the chassis and is drilled and swaged  (New chassis only)	£300.00
Front Upright	Lightweight fabricated steel uprights to take the aluminum hubs. They come without the brake caliper mounts but mounts are available for most types of brakes	£40.00 each
Ally Front Hubs	Lightweight front hubs with Ford or Vauxhall fittings for studs	£40.00 each
Wheel Bearing Kit	Wheel bearing kit to suit ally hubs	£13.00 each
Ally Hub Caps	To suit our ally hubs	£6.00 each
J Spec Wheel Adaptors	Wheel Adaptors to convert rear hubs on Junior Specials to Ford PCD	£40.00 each
Front Discs	Steel wavy type front discs to fit ally hubs	£17.00 each
Rear Discs (Class 9)	Machined ford discs to take bike calipers	£45.00 / pair
Rear Discs (Class 8)	Inboard mounted wavy type brake discs	£17.00 each
Anti Roll Bar Kit	Kit consists of a ¾ “ diameter stainless roll bar with 2 chassis mounting brackets and 2 clevises to take rose joints	£100.00
Steering Wheel & Boss	15 “ or 13” race steering wheel complete with hexagonal quick release boss (please specify 13" or 15" when ordering)	£65.00
Ally Fuel Tank	Fabricated ally fuel tank to fit the chassis	£65.00
Battery Box	Fabricated ally battery box to fit red top 25 battery	£30.00
Standard Kirkey Seat	Standard Kirkey ally seat complete with cover (Please specify size with order)	£130.00
3" Harness	3” NASCAR type harness	£100.00
Brake Cylinder Clevis	Machined clevis to screw onto master cylinders and fit pedal	£3.00 each
Front Wishbone Spacers	Spacer kit to fit the front wishbone rose joints and reduce them to 3/8 “	£16.00 per set
High Angle Flanges	High angle flanges to fit 100mm CV and enable 10 degrees more angle on the drive shaft	£10.00 each
CV Boot Kit	CV boot exactly the correct size to fit the high angle flanges	£6.00 each
3/4" Roll Bar Clevis	Ally machined roll bar clevis ready to fit rose joints	£7.00 each
Powder Coating	Chassis and panels powder coated and plated to your colour  (Only available with new chassis / panel set. Please specify colour/colours on order)	£250.00
Paddle Shift Gear Linkage Kit	Steering column mounted paddle change kit including cable	£100.00
Lightweight CV Joint	Standard 100mm CV's machined down lightened. Available on an exchange basis	£40.00 per set
F600 Axle Kit	F600 rear axle assembly with two bearing blocks fitted and two flanges welded on - one for 100mm cv and the other to take a cv and drive sprocket	£180.00
Pedals	Profile cut pedals pre drilled	£30.00 per set
C spanner	For shock adjustment (2.25")	£5.00
4 Metre Throttle Cable	Universal 4 Metre throttle cable	£20.00
Gear Cable	Universal gear cable	£40.00
Beadlock Kit	Complete beadlock kit in either 14" or 15" (please specify at time of ordering). Requires machining of wheel and welding on of ring.	£95.00
Beadlock Ring	Spare beadlock ring in either 14" or 15" (please specify at time of ordering).	£15.00
Beadlock Kit (Fitted)	Complete beadlock kit in either 14" or 15" (please specify at time of ordering). Fitted to your wheel.	£130.00
Drive Shafts	Ford splined driveshafts (one pair 25 spline shafts 1x 27", 1 x 17") Non-standard sizes available on request	£180.00
Fuel Filler Neck	Fuel filler neck and cap for welding on to your fuel tank	£12.00
Saloon Front Cradle	Saloon front cradle, Same geometry as our current Special chassis so will accepted our wishbones etc. Made with extra long chassis rail for you to cut to suit your application.	£175.00

Chassis Components

(C) Copyright Quinny 2008. All rights reserved.

DRD Racing offer a full range of Autograss related products and services from a chassis to an individual bracket. A new lightweight drive box is available together with a complete new range of offroad shocks designed in conjunction with DRD Racing.